70 Tonne Modular Spreader Beam

Category:

In Stock

The Britlift Traditional Modular Spreader beam is available in a huge range of standard sizes (4 tonne to 1000 tonne) and has been optimised to make it the lightest system of its kind worldwide.

Modular Spreader Beam, Spreader Beam & Spreader Bars

Made in Britain

IN STOCK and available off-the-shelf the sizes immediately available are 4, 8, 13, 24, 34, 50 and 70 tonne systems, with prices starting at £450.

We can also supply any associated rigging (chain slings, ploy slings, shackles, chain blocks, container lugs, load monitoring, etc.). Capacities above 150 tonne are built to order within 2-3 weeks.

The Britlift modular system is easy to handle, transport, store, stock and spec. We are able to manufacture bespoke custom sizes within 1-2 weeks.

To view some different ways you can use spreader beams to achieve 2, 4, 6 or 8 points of lift then visit our Rigging Design page.

 

 

Achilles Network MemberAchilles UVDB Silver PlusISO 9001 RegisteredFSB Member Badge

 

Description

The Britlift Traditional Modular Spreader is our first choice when adjustability, flexibility, speed of supply and/or self-weight is critical. A spreader beam should never be used to sling along the beams length, but only from the two outer points where the shackles connect. If you do need to sling along the beam’s length, or easy and quick adjustment, then you may need a lifting beam.

Specifications

45° STV 30° STV 20° STV
SPAN SWL IN TONNES MINIMUM TOP SLING LENGTH REQUIRED (METERS) SWL IN TONNES MINIMUM TOP SLING LENGTH REQUIRED (METERS) SWL IN TONNES MINIMUM TOP SLING LENGTH REQUIRED (METERS)
1 70 0.5 70 0.8 70 1.2
1.5 70 0.9 70 1.3 70 1.9
2 70 1.2 70 1.8 70 2.6
2.5 70 1.6 70 2.3 70 3.4
3 70 1.9 70 2.8 70 4.1
3.5 70 2.3 70 3.3 70 4.8
4 70 2.6 70 3.8 70 5.6
4.5 70 3 70 4.3 70 6.3
5 70 3.3 70 4.8 70 7
5.5 70 3.7 70 5.3 70 7.7
6 70 4 70 5.8 70 8.5
6.5 70 4.4 70 6.3 70 9.2
7 70 4.7 70 6.8 70 9.9
7.5 70 5.1 70 7.3 70 10.7
8 70 5.5 70 7.8 70 11.4
8.5 64 5.8 70 8.3 70 12.1
9 57 6.2 70 8.8 70 12.9
9.5 51 6.5 70 9.3 70 13.6
10 46 6.9 70 9.8 70 14.3
10.5 41 7.2 70 10.3 70 15.1
11 38 7.6 65 10.8 70 15.8
11.5 34 7.9 59 11.3 70 16.5
12 30 8.3 53 11.8 70 17.3
12.5 28 8.6 48 12.3 70 18
13 25 9 44 12.8 70 18.7
13.5 23 9.3 40 13.3 65 19.4
14 21 9.7 37 13.8 59 20.2

Warning sm THIS IS A SPREADER BEAM AND MUST ONLY BE LOADED AT THE TWO END POINTS THROUGH THE END LINKS. NEVER HANG LOADS FROM THE STRUTS Warning sm

  • THIS IS A SPREADER BEAM AND MUST ONLY BE LOADED AT THE TWO END POINTS THROUGH THE END LINKS. NEVER HANG LOADS FROM THE STRUTS.
  • STV (SLING TO VERTICAL) ANGLE MUST BE NO MORE THAN 45°.
  • CHART 1 MUST BE REFERRED TO IN ORDER TO ENSURE THAT THIS BEAM IS SUITABLE FOR THE PLANNED LIFT.
  • END LINKS MUST HANG DOWNWARDS, TOWARDS THE LOAD.
  • THE WLL (WORKING LOAD LIMIT) OF A SINGLE LINK PLATE IS 35 TONNES (70 TONNES COMBINED). DO NOT EXCEED THIS WEIGHT AT ONE END OF THE BEAM.
  • THE T70 USES M20 x 65 GRADE 8.8 HT BOLTS, NUTS AND WASHERS. THE RECOMMENDED TIGHTENING TORQUE IS 160Nm.
  • ANY PERSONNEL USING THIS PRODUCT MUST BE A TRAINED AND COMPETANT RIGGER OR SLINGER/SIGNALLER.
  • THE ONGOING USE OF THIS PRODUCT MUST BE IN ACCORDANCE WITH THE REQUIRMENTS IN LOLER (LIFTING OPERATIONS AND LIFTING EQUIPMENT REGULATIONS 1998).
  • PLEASE ENSURE THAT NO MORE THAN 7 COMPONENTS ARE USED IN THE ASSEMBLY OF A BEAM (INCLUDING END PIECES).
  • CHECK THAT NO RIGGING EQUIPMENT CLASHES WITH THE BEAM. THE BEAM MUST ONLY BE LOADED THROUGH THE SHACKLE PIN HOLES AT EACH END.