Telescopic Spreader Beam

12 Tonne Telescopic Spreader Beam

Category:

In Stock

The Britlift Telescopic Spreader beam is available in a range of standard capacities and spans.

12 Tonne Telescopic Spreader Beam

Made in Britain

Telescopic spreader beams are the perfect solution for quick adjustment! Built to order, in a matter of a couple of weeks.

Slightly heavier than a modular equivalent, a telescopic spreader beam allows for quick sliding adjustment between lengths, with the standardised adjustment points at 125mm or 250mm apart, giving a huge amount of flexibility. Britlift can also custom design a telescopic beam, to match your lifting requirements exactly.

We can also supply any associated rigging (chain slings, ploy slings, shackles, chain blocks, container lugs, load monitoring, etc.).

To view some different ways you can use spreader beams to achieve 2, 4, 6 or 8 points of lift then visit our Rigging Design page.

Contact Us
Specifications

 

 

Achilles Network MemberAchilles UVDB Silver PlusJoscar RegisteredFSB Member BadgeUKCACELiving Wage EmployerISO 9001 CertifiedISO 14001 CertifiedISO 45001 CertifiedEN 1090-1 Certified

 

Description

The Britlift telescopic spreader beam is the perfect solution for quick adjustment! Built to order.

Slightly heavier than a modular equivalent, a telescopic spreader beam allows for quick sliding adjustment between lengths and adjustment points can be as little as 50mm apart giving a huge amount of flexibility.

This set of user instructions is for various types and sizes of Britlift telescopic Spreader Beams. The information in this set of user instructions is generalised to suit all of the beams listed below, covering all the necessary points and gives a clear guide on how to use this.

Specifications

DESCRIPTION SELF WEIGHT TOP SHACKLES BOTTOM SHACKLES ADJUSTMENT (MM)
TELE-4 Telescopic Spreader Beam—1.5m-2.5m 30 6.5 Tonne 4.75 Tonne 125
TELE-4 Telescopic Spreader Beam—2.5m-4m 45 6.5 Tonne 4.75 Tonne 250
TELE-8 Telescopic Spreader Beam—1.5m-2.5m 35 6.5 Tonne 4.75 Tonne 125
TELE-8 Telescopic Spreader Beam—2.5m-4m 50 6.5 Tonne 4.75 Tonne 250
TELE-12 Telescopic Spreader Beam—1.5m-2.5m 50 12 Tonne 8.5 Tonne 125
TELE-12 Telescopic Spreader Beam—2.5m-4m 80 12 Tonne 8.5 Tonne 250
TELE-12 Telescopic Spreader Beam—4m-6m 120 12 Tonne 8.5 Tonne 250
TELE-16 Telescopic Spreader Beam—1.5m-2.5m 55 12 Tonne 8.5 Tonne 125
TELE-16 Telescopic Spreader Beam—2.5m-4m 85 12 Tonne 8.5 Tonne 250
TELE-16 Telescopic Spreader Beam—4m-6m 125 12 Tonne 8.5 Tonne 250

Warning sm GENERAL SAFETY REQUIREMENTS Warning sm

  • THE WORKING LOAD LIMITS OF THESE SPREADERS (4 TONNES, 8 TONNES, 12 TONNES AND 16 TONNES) MUST NOT BE EXCEEDED UNDER ANY CIRCUMSTANCES.
  • ENSURE THAT THE LINK PLATES (WHICH EACH HAVE A WORKING LOAD LIMIT OF HALF OF THE WORKING LOAD LIMIT OF THE BEAM) HANG DOWN, AND THAT THE APPROPRIATE BOTTOM SHACKLES (SEE CHART 1) ARE CONNECTED TO THE BOTTOM HOLES OF THE LINK PLATES.
  • ADJUSTMENT OF THE SPAN OF THE SPREADER IS CARRIED OUT BY REMOVING THE LOAD PINS AND SLIDING THE INNER BEAM MEMBER TO THE REQUIRED SPAN WHILST ENSURING THAT THE HOLES IN THE OUTER BEAM MEMBER ARE ALIGNED WITH THE MATCHING PAIR OF HOLES IN THE INNER BEAM MEMBER.
  • ONCE THE SPREADER BEAM HAS BEEN ADJUSTED TO THE REQUIRED SPAN AND THE HOLES ARE ALIGNED, THE LOAD PINS ARE TO BE FITTED AND SECURED USING THE SHACKLE PIN NUTS AND COTTER PINS.
  • ANY PERSONNEL USING THIS PRODUCT MUST BE A TRAINED AND COMPETENT RIGGER OR SLINGER/SIGNALER.

Related products